Sachse Concrete Lifting logoSachse Concrete LiftingSachse, TX
Concrete Lifting photo

Sachse Concrete Lifting

Concrete Slab Lifting in Sachse, TX

Concrete slab lifting in Sachse fills voids and levels sunken slabs with injection foam or slurry. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Sachse and nearby communities.

Is your slab sinking on one side while the rest stays put? That's usually a void underneath, not a bad pour. Sachse Concrete Lifting fills the gap and raises the concrete back to grade instead of ripping it out.

Expansive clay under a lot of Sachse properties pulls moisture out in summer and swells back up after rain. The slab doesn't move evenly with it. That mismatch is what creates the dip you're standing on.

What's included

What's Included

  • Site walk to map the low spot and probe for the void depth
  • Drilling a pattern of small holes sized to the injection method
  • Mudjacking slurry or polyurethane foam pumped in under pressure
  • Level check with a straightedge before we call it done
  • Hole patching so the surface looks close to original
  • Full cleanup, no slurry tracked into the yard or driveway

How it works

How We Lift a Slab

  1. Site visit and slab assessment photo
    Step 1

    Assess

    Walk the slab, mark low points, check drainage direction.

  2. Void assessment photo
    Step 2

    Drill

    Small holes placed to reach the void without weakening the slab.

  3. Port drilling photo
    Step 3

    Inject

    Foam or slurry pumped in, watched closely as it rises.

  4. Foam injection photo
    Step 4

    Check level

    Straightedge and level confirm the lift is even.

  5. Final walkthrough photo
    Step 5

    Patch

    Holes sealed and finished to blend with the surrounding surface.

  6. Port sealing and cleanup photo
    Step 6

    Clean up

    Equipment, debris, and any spill cleared before we leave.

FAQs

Concrete Slab Lifting FAQs

How much does slab jacking cost?

Most residential slab lifting jobs run $500 to $2,000 depending on slab size and how deep the void is. Bigger driveways or slabs with multiple low spots cost more. A free estimate gives you a real number for your job.

How long does slab jacking last?

A properly filled void holds for years, often a decade or longer, as long as the underlying soil and drainage don't change. It's not permanent in the sense that soil movement never stops. It's a durable fix, not a patch.

Is mudjacking or foam better?

Foam is lighter and cures fast. Good for thinner slabs or spots where you need to drive on it the same day. Mudjacking slurry has more mass, which some crews prefer on thicker driveway slabs. Either works. We'll tell you which fits your slab during the estimate.

Before & after

Before and After

  • Concrete Slab Lifting photo
    Before
  • Concrete Slab Lifting photo
    After

Timeline

How Long Does a Concrete Slab Lifting Take?

  1. 01

    Stage 1

    Most single-slab jobs wrap up in one visit.

  2. 02

    Stage 2

    Here's the rough breakdown

  3. 03

    Site visit and assessment

    same day
  4. 04

    Drilling and injection

    2–4 hours
  5. 05

    Drive-on wait

    same day

    for foam, for slurry

Need a schedule that fits?

Get a Free Estimate

Next step

Get a Concrete Slab Lifting Estimate in Sachse

Call Sachse Concrete Lifting at +1 (830) 376-7024 for a free estimate, or check Mudjacking if you want to compare methods. Head back to Home or Contact to get scheduled.

Ask about Concrete Slab Lifting

Tell us about the project and how to reach you.

Call (830) 376-7024